Mild steel weldmesh & weavemesh
Ferrier Wire Mild Steel Woven and Welded Wire Mesh
Mild steel (sometimes referred to as “plain” steel) is a material that consists mainly of carbon and iron. Mild steel is a very attractive option for a wide range of applications due to its relatively low cost compared to other materials as well as its wide variety of applications. These applications include guarding, railing infills, cabinetry and millwork, and filtration.
One thing that must be taken into consideration when working with mild steel is that bare mild steel will rust and corrode over time. In some cases even the moisture in the air in indoor applications can cause bare mild steel to rust. A slightly more expensive alternative to this would be our stainless steel woven and welded wire mesh line of products which are rust and corrosion resistant and suitable for outdoor use. Powder coating and plating options are available for all of our mild steel products, for more information about our finishing options please contact us.
MSWEA33063IC
Spec. Sheet
---Centres or Mesh Count
3 x 3 MESH (8.5 mm x 8.5 mm) c to cWire Diameter
0.063" (1.600 mm)Clear Opening
0.270" (6.858 mm)Percent Open Area
65.60%Weight
0.776 lbs/sf (0.352 kgs/sf)
MSWEA44063
Spec. Sheet
---Centres or Mesh Count
4 x 4 MESH (6.4 mm x 6.4 mm) c to cWire Diameter
0.063" (1.600 mm)Clear Opening
0.187" (4.750 mm)Percent Open Area
56.00%Weight
1.048 lbs/sf (0.476 kgs/sf)
MSWEA44047
Spec. Sheet
---Centres or Mesh Count
4 x 4 MESH (6.4 mm x 6.4 mm) c to cWire Diameter
0.047" (1.194 mm)Clear Opening
0.203" (5.156 mm)Percent Open Area
56.90%Weight
0.576 lbs/sf (0.261 kgs/sf)
MSWEA66063
Spec. Sheet
---Centres or Mesh Count
6 x 6 MESH (4.2 mm x 4.2 mm) c to cWire Diameter
0.063" (1.600 mm)Clear Opening
0.104" (2.642 mm)Percent Open Area
38.90%Weight
1.630 lbs/sf (0.739 kgs/sf)
MSWEA66047
Spec. Sheet
---Centres or Mesh Count
6 x 6 MESH (4.2 mm x 4.2 mm) c to cWire Diameter
0.047" (1.194 mm)Clear Opening
0.120" (3.048 mm)Percent Open Area
51.80%Weight
0.882 lbs/sf (0.400 kgs/sf)
MSWEA66035
Spec. Sheet
---Centres or Mesh Count
6 x 6 MESH (4.2 mm x 4.2 mm) c to cWire Diameter
0.035" (0.889 mm)Clear Opening
0.132" (3.353 mm)Percent Open Area
62.70%Weight
0.481f lbs/sf (0.218 kgs/sf)
MSWEA88047
Spec. Sheet
---Centres or Mesh Count
8 x 8 MESH (3.2 mm x 3.2 mm) c to cWire Diameter
0.047" (1.194 mm)Clear Opening
0.078" (1.981 mm)Percent Open Area
38.90%Weight
1.209 lbs/sf (0.549 kgs/sf)
MSWEA88028
Spec. Sheet
---Centres or Mesh Count
8 x 8 MESH (3.2 mm x 3.2 mm) c to cWire Diameter
0.028" (0.711 mm)Clear Opening
0.097" (2.464 mm)Percent Open Area
60.20%Weight
0.411 lbs/sf (0.186 kgs/sf)
Our mild steel wire mesh products are available in both woven and welded varieties. From welded products with clear openings ranging from 1.813” to tightly woven products with clear openings of 0.009”, Ferrier Wire can offer a very diverse variety of mild steel wire mesh products with many different uses and applications.
Mild steel mesh can be used in both industrial and design applications. One project worth noting that utilized mild steel woven wire mesh for its design capabilities was a wine cellar door project. This project utilized our mild steel 4 x 4 x .047” woven pattern for infills on a wine cellar door. The use of this material allowed for partial transparency when looking at the wine cellar through the doors, creating an interesting visual appeal to the cellar. More information and pictures of this project can be viewed by clicking here.
If you have any questions about our mild steel weavemesh, weldmesh, or any other products, please call or email us.
Solutions for Performance & Creativity
Connect with Our Team & Kickstart Your
Project Today!
