Mild steel weldmesh & weavemesh
Ferrier Wire Mild Steel Woven and Welded Wire Mesh
Mild steel (sometimes referred to as “plain” steel) is a material that consists mainly of carbon and iron. Mild steel is a very attractive option for a wide range of applications due to its relatively low cost compared to other materials as well as its wide variety of applications. These applications include guarding, railing infills, cabinetry and millwork, and filtration.
One thing that must be taken into consideration when working with mild steel is that bare mild steel will rust and corrode over time. In some cases even the moisture in the air in indoor applications can cause bare mild steel to rust. A slightly more expensive alternative to this would be our stainless steel woven and welded wire mesh line of products which are rust and corrosion resistant and suitable for outdoor use. Powder coating and plating options are available for all of our mild steel products, for more information about our finishing options please contact us.
Product Code : MSWEA1010025
Spec. Sheet
Centres or Mesh Count
10 x 10 MESH (2.5 mm x 2.5 mm) c to cWire Diameter
0.025" (0.635 mm)Clear Opening
0.075" (1.905 mm)Percent Open Area
56.30%Weight
0.412 lbs/sf (0.187 kgs/sf)
Product Code : MSWEA1010035
Spec. Sheet
Centres or Mesh Count
10 x 10 MESH (2.5 mm x 2.5 mm) c to cWire Diameter
0.035" (0.889 mm)Clear Opening
0.065" (1.651 mm)Percent Open Area
42.30%Weight
0.831 lbs/sf (0.378 kgs/sf)
Product Code : MSWEA3030012
Spec. Sheet
Centres or Mesh Count
30 x 30 MESHWire Diameter
0.012" (0.305 mm)Clear Opening
0.021" (0.533 mm)Percent Open Area
40.80%Weight
0.294 lbs/sf (0.133 kgs/sf)
Product Code : MSWEA4040010
Spec. Sheet
Centres or Mesh Count
40 x 40 MESHWire Diameter
0.010" (0.254 mm)Clear Opening
0.015" (0.381 mm)Percent Open Area
36.00%Weight
0.276 lbs/sf (0.125 kgs/sf)
Product Code : MSWEA60600075
Spec. Sheet
Centres or Mesh Count
60 x 60 MESHWire Diameter
0.0075" (0.191 mm)Clear Opening
0.009" (0.229 mm)Percent Open Area
30.50%Weight
0.237 lbs/sf (0.108 kgs/sf)
Product Code : MSWLD11097
Spec. Sheet
---Spacing
1" x 1" (25.4 mm x 25.4 mm) c to cWire Diameter
0.097" (2.464 mm)Weight/Sheet
20 lbs (9 kgs)Material
Mild SteelConstruction
Welded
Product Code : MSWLD11125
Spec. Sheet
Spacing
1" x 1" (25.4 mm x 25.4 mm) c to cWire Diameter
0.125" (3.175 mm)Weight/Sheet
33 lbs (15 kgs)Material
Mild SteelConstruction
Welded
Product Code : MSWLD15I15I125
Spec. Sheet
---Spacing
1-1/2" x 1-1/2" (38.1 mm x 38.1 mm) c to cWire Diameter
0.125" (3.175 mm)Weight/Sheet
24 lbs (11 kgs)Material
Mild SteelConstruction
Welded
Our mild steel wire mesh products are available in both woven and welded varieties. From welded products with clear openings ranging from 1.813” to tightly woven products with clear openings of 0.009”, Ferrier Wire can offer a very diverse variety of mild steel wire mesh products with many different uses and applications.
Mild steel mesh can be used in both industrial and design applications. One project worth noting that utilized mild steel woven wire mesh for its design capabilities was a wine cellar door project. This project utilized our mild steel 4 x 4 x .047” woven pattern for infills on a wine cellar door. The use of this material allowed for partial transparency when looking at the wine cellar through the doors, creating an interesting visual appeal to the cellar. More information and pictures of this project can be viewed by clicking here.
If you have any questions about our mild steel weavemesh, weldmesh, or any other products, please call or email us.
Solutions for Performance & Creativity
Connect with Our Team & Kickstart Your
Project Today!
