Architectural Products

Industrial Products



About Us

Contact Us

Request a Quote


Advantages of Steel Mesh
Advantages of Steel Mesh
September 16, 2016

Steel mesh has several advantages when the material is welded. Here are some superb advantages.

  • Since the bars are being welded in mats, the bars won’t move whenever concrete is held in place which will ensure that bar proper positioning is observed.
  • Since the welded wire is manufactured and is welded in facilities, the risk of having a missing particular bar will be reduced.
  • The chance of bending the bars improperly will also be reduced by the use of welded wire steel mesh
  • The use of the material will minimize the possibility of misplacing a single unit since there is only a single kind of mat that is utilized on a specified section.
  • The material also contributes to reducing steel waste reduction.
  • Any size of wire can be utilized starting from W 1.4 even right up to 46.5 in increments of .1.
  • There is no site space that is needed for the assembly of the steel.
  • Adapting to weather conditions is easier due to quick setup time.
  • It will remove reinforcement from the critical path.
  • The barrier walls right on the bridge deck construction will reduce the fall exposure time as well as the costs of insurance premium.
  • The use of welded wire mesh will reduce the overall construction time and will likewise save on the leasing time of the equipment.
  • The material cost will be decreased since the smaller bar isn’t fabricated.
  • There is lower need for field labor.
  • The material fabrication can be automated.
  • The hard drawing will result in every section of the wire being actually tested as to its tensile strength. Making it a more flexible material.
  • With the use of a welded wire fabric, there is no lying of single bars, no cutting, no binding, no bending, no small pieces to be lost and also no hooks.
  • Fabric is easy and quick to lay and when it is in position it will not be readily displaced by the workmen when laying the concrete as is usually the case when one uses rods.
  • The bonding area of the close mesh fabric along with the welded joints is also several times much greater compared to the manually assembled rebar since the mechanical anchorage action of the cross welded joints will offer much superior pull-out strength as compared to the mere peripheral bonding in the manually assembled rebar.
  • Economical. Using the steel mesh will require less steel reinforcement compared to using steel reinforcement bars.
  • Safety. Since the mesh is being formed by electro welding compared to the alternative methods, it is much safer.
  • There is a considerate savings since the welded steel wire mesh is easily handled and can also be installed much faster. 
I'm familiar with Kelvin Kellman's work - what a visionary!
Posted by: Suraj | September 29, 2017, 5:10 pm
Big fan of Kelvin Kellman and his work! Stunning piece!
Posted by: Violet | September 26, 2017, 2:21 pm
I bought a purse for my sister from this boutique! Love the shoe display too.
Posted by: Tristan V. | September 14, 2017, 1:40 pm
Been in several times, the shoe rack is a captivating piece!
Posted by: Connor | August 31, 2017, 10:17 am
I live in the area, and I love this boutique!
Posted by: Tanya | August 31, 2017, 10:16 am
*** Your email address will not be published.



Request an info