Mild steel weldmesh & weavemesh
Ferrier Wire Mild Steel Woven and Welded Wire Mesh
Mild steel (sometimes referred to as “plain” steel) is a material that consists mainly of carbon and iron. Mild steel is a very attractive option for a wide range of applications due to its relatively low cost compared to other materials as well as its wide variety of applications. These applications include guarding, railing infills, cabinetry and millwork, and filtration.
One thing that must be taken into consideration when working with mild steel is that bare mild steel will rust and corrode over time. In some cases even the moisture in the air in indoor applications can cause bare mild steel to rust. A slightly more expensive alternative to this would be our stainless steel woven and welded wire mesh line of products which are rust and corrosion resistant and suitable for outdoor use. Powder coating and plating options are available for all of our mild steel products, for more information about our finishing options please contact us.
MSWEA15I15I144
Spec. Sheet
---Centres or Mesh Count
1-1/2" x 1-1/2" (38.1 mm x 38.1 mm) c to cWire Diameter
0.144" (3.658 mm)Clear Opening
1.356" (34.442 mm)Percent Open Area
81.70%Weight
0.720 lbs (0.327 kgs/sf)
MSWEA2I1144
Spec. Sheet
---Centres or Mesh Count
2" x 1" (50.8 mm x 25.4 mm) c to cWire Diameter
0.144" (3.658 mm)Clear Opening
1.856" x .856" (47.142 mm x 21.742 mm)Percent Open Area
79.40%Weight
N/A
MSWEA11125
Spec. Sheet
---Centres or Mesh Count
1" x 1" (25.4 mm x 25.4 mm) c to cWire Diameter
0.125" (3.175 mm)Clear Opening
0.875" (22.230 mm)Percent Open Area
76.60%Weight
0.940 lbs/sf (0.426 kgs/sf)
MSWEA7575125
Spec. Sheet
---Centres or Mesh Count
3/4" x 3/4" (19.1 mm x 19.1 mm) c to cWire Diameter
0.125" (3.175 mm)Clear Opening
0.625" (15.875 mm)Percent Open Area
69.40%Weight
1.260 lbs/sf (0.572 kgs/sf)
MSWEA7575092
Spec. Sheet
---Centres or Mesh Count
3/4" x 3/4" (19.1 mm x 19.1 mm) c to cWire Diameter
0.092" (2.337 mm)Clear Opening
0.625" (15.875 mm)Percent Open Area
76.90%Weight
0.950 lbs/sf (0.432 kgs/sf)
MSWEA22104
Spec. Sheet
---Centres or Mesh Count
1/2" x 1/2" (12.7 mm x 12.7 mm) c to cWire Diameter
0.104" (2.642 mm)Clear Opening
0.396" (10.058 mm)Percent Open Area
62.40%Weight
1.442 lbs/sf (0.654 kgs/sf)
MSWEA22092
Spec. Sheet
---Centres or Mesh Count
1/2" x 1/2" (12.7 mm x 12.7 mm) c to cWire Diameter
0.092" (2.337 mm)Clear Opening
0.408" (10.363 mm)Percent Open Area
66.59%Weight
1.102 lbs/sf (0.500 kgs/sf)
MSWEA33080
Spec. Sheet
---Centres or Mesh Count
3 x 3 MESH (8.5 mm x 8.5 mm) c to cWire Diameter
0.080" (2.032 mm)Clear Opening
0.253" (6.426 mm)Percent Open Area
57.60%Weight
1.264 lbs/sf (0.574 kgs/sf)
Our mild steel wire mesh products are available in both woven and welded varieties. From welded products with clear openings ranging from 1.813” to tightly woven products with clear openings of 0.009”, Ferrier Wire can offer a very diverse variety of mild steel wire mesh products with many different uses and applications.
Mild steel mesh can be used in both industrial and design applications. One project worth noting that utilized mild steel woven wire mesh for its design capabilities was a wine cellar door project. This project utilized our mild steel 4 x 4 x .047” woven pattern for infills on a wine cellar door. The use of this material allowed for partial transparency when looking at the wine cellar through the doors, creating an interesting visual appeal to the cellar. More information and pictures of this project can be viewed by clicking here.
If you have any questions about our mild steel weavemesh, weldmesh, or any other products, please call or email us.
Solutions for Performance & Creativity
Connect with Our Team & Kickstart Your
Project Today!
